LEMAN RemoteID SMS Commands
The table below describes the commands which could be sent by SMS to the LEMAN RemoteID drone tracker.
Notice that the password 123456 is used for the examples below. It is recommended to change the password to custom before first use.
| Command | Description | Example |
| :passwordF | Send back the tracker location | :123456F |
| :passwordG | Actual parameters status request Answer: #IMEI,CMD-G, A1:-:30, A2:-:20, A3:-:20, A4:-:20, A5:-:20, A6:-:20, A7:-:20, A8:-:20, IP;Port,Password,APN:,name,password,Report time-unit,Ask for GPS-unit,Reconnect time-unit,time zone,speed value,low battery value,Heart beat-its unit# | :123456G |
| :currentpasswordH, newpassword | Change password | :123456H,987654 |
| :passwordM1,00xS | Tracking period every x seconds | :123456M1,001S |
| :passwordOAPN,, | Set APN | :123456Ogprs.swisscom.ch,, |
| :passwordWx | Switch remote ID Wi-Fi off/on. x = 0, switch off x = 1, switch on | :123456W1 or :123456W0 |
| :passwordY,UASoperator number | Set the UAS operator number. It has to be loaded completely with the key as described in the ASTM F3411-19 Remote ID (network) and Tracking standard | :123456Y,INV13azertyuiopg-abc |
​ ​ ​ ​ ​ ​ ​Previous​​​Next